The package must be stored in a dry and no dust place.
When on pallets, handle by transpallet or electric lifter.
UNPACKING
Open the cardboard box, take off the machine and place it on a flat surface avoiding positions which could cause the falling of the
product
DIRECTIVE 2002/96/CEE
At the end of his working life the product must not be disposed as urban waste. It must be taken to a special local authority
differentiated waste collection centre or to a dealer providing this service.
INSTALLATION
Install the machine on a flat surface and avoid positions which could cause the machine to fall. The surface must be dry, strong, about
80 cm height and with sufficiently space around for correct use and for the required maintenance.
Environmental conditions :
Minimum tempe10° - Max. tempe 38°
Minimum moisture 30% - Max. moisture 80%
ELECTRICAL CONNECTION
Before connecting the machine to power supply, take care of the following :
-
Make sure the socket is provided with a suitable protective earth protection
-
Make sure that the voltage and frequency of supply correspond to those indicated on the nameplate of the machine
-
Make sure that the way how the power cord is placed will avoid sliding and tripping risks for persons
-
It is user's responsibility to ensure that the connection of the machine to the electric system is in compliance with the rules in
force in the country where the machine is installed, and to ensure that a correct installation is made by a qualified technician.
MAINTENANCE AND CLEANING
:
Disconnect the plug from the socket before any operation on product
Let the appliance cool down before cleaning
Never use water jets for cleaning
Don’t clean the appliance or trays in a dishwasher
Never use brushes that may deteriorate the surface of the machine
Use a moistened soft cloth and neutral detergents to avoid deterioration of the appliance surface
Check the power cord periodically, if damaged it must be replaced by a supply cord of the similar type delivred by the after sales
service
Contact the supplier in case of mal functioning or damaged parts on the product
Stainless dehydrator – Read carrefuly before use and keep this instruction
TECHNICAL RATINGS :
Power supply : 230-260 W, 230-240Vac 50 Hz, Insulation Class I
Digital panel showing the working hours
Temp. Range from 35° up to 70°C
Forced ventilation from the bottom to the top
5 inox trays (may be bought as spare parts)
Internal dim. Of the trays (cm) : 32 x 29,5
Height of the trays (cm) : 3,0
Total weight : (Kg) 10,5
Dimensions of the product : (cm) 35 x 40 x 29
Model 10080 NP is equipped with two fuses placed at the bottom of the power connector on the product rear side
Fuse ratings : Fast acting F6,3A - 250V - 5x20 mm
