Wuxi Raycus Fiber Laser Technologies Co., Ltd.
User Guide of Raycus RFL-A6000D~A12000D
62
Figure 57 Interface of empty all programming stored in the current laser programming mode
8.13.4 Edit Programming
Programming editing when the laser is working in programming mode as shown in Figure 58.
Step 1:left click the pre-edited programming number.
Step 2:select the command under the command type, click ‘Add’.
Step 3:enter the parameters and click ‘Save’. The instruction appears in the left program list
immediately.
Step 4:after editing all commands, click ‘Write Laser’.
Step 5:the new programming number will turn green when user re-click the ‘refresher list’ button.
Write successfully.
a) Select the pre-edited programming number
