Wuxi Raycus Fiber Laser Technologies Co., Ltd.
User Guide of Raycus RFL-A6000D~A12000D
34
6.3 Emission external control set by power analog in ON mode
Figure 22 Wiring diagram of emission external control set by power analog on the ON mode
Operation methods:
a) The rear panel air switch hits ON to supply power to the laser.
b) The front panel key switch is turned ON to put the laser into ON mode.
c) Open the upper computer software.
d) Hit the red ON button to view the red light.
e) open AD mode, open external control mode.(this mode can be remembered when power is lost.)
f) click the main power ON button in the upper computer software to turn on the main power.
g) wait for the laser tricolor light green light on, the laser ready to work completed.
h) Output analog and outgoing light signals through the control board.
i) Check that the red light of the laser tricolor lamp is on, and the laser is outputting light.
