Wuxi Raycus Fiber Laser Technologies Co., Ltd.
User Guide of Raycus RFL-A6000D~A12000D
43
DCM
Disable Calibration Mode
（
AD analog response time is less than 100 us in
this mode
）
Send: ‘DCM\r’
Return: ‘DCM\r’
Others
Command error
Send: ‘BGM\r’
Return: ‘Command Err! \r’
STA
Read device status
– Read the product status. A return value of 32-Bit
digital information. The meaning of each Bit is as
follows (undefined or ‘reserved’ Bit negligible):
Send: ‘STA’
Return: ‘STA:4100’
returned value 4100(Decimal) can
be converted to 0 x1004
(hexadecimal), and then converted
to binary to see that Bits2 and 12
have been set.The laser enable is on
and the modulation mode is enabled
Bit 0
Normal operation
Authorization time
Bit 1
Normal
Temperature too high
Bit 2
Emission Off
Emission On or in preparation
Bit 3
No high reflection
High reflection Abnormal
Bit 4
External AD mode=off
External AD mode=on
Bit 5
Power Correction Mode=off
Power Correction Mode=on
Bit 6
Normal
Sub-controlling communication Abnormal
Bit 7
Normal
Sub-module Abnormal
Bit 8
Guide red light=off
Guide red light=on
Bit 9
The laser is not ready
The laser is ready
Bit 10
QCW mode=off
QCW mode=on
Bit 11
Module Main Power=off
Module Main Power=on
Bit 12
Modulation mode=off
Modulation mode=on
Bit 13
Normal
Leakage sensors 1 leaking
Bit 14
Normal
Leakage sensors 2 leaking
