55M4500CCE00 REV A
2)
Select “transfer from system to USB (backup)” ” and press
“
”
3)
Select “calibration ‐> USB stick” ” and press
“
”
, a copy of the calibration
information will be created in a file called “cranename_000000.cal” located in
the root folder of the USB memory stick. If a file of this name already exists ie a
previous backup has been made then the new file will become
“cranename_000000‐1.cal” etc.
The final completed calibration file should be renamed:
“cranename_serialnumber_date_tech.cal”
where serialnumber is the serial number of
the i4500 system, the date is the date the calibration file is completed/downloaded and
tech is the initials of the calibrating technician.
Some configuration specific calibration data may be stored in the load chart file and it is
recommended to also make a backup copy of this second file:
Select “load chart ‐> USB stick” ” and press
“
”
, a copy of the load chart file will be
created in a file called “cranename”, this file will overwrite any existing file of the same
name and will not have a file extension included. This file should be renamed
“cranename_serialnumber_date_tech.cf”
and stored as a matching pair with the cal
file above. A copy of these files should be sent to Rayco Wylie for archive purposes.
Содержание i4500
Страница 2: ...55M4500CCE00 REV A...
