RaycoWylie i4500, Инструкция по калибровке

Страница: 3 / 50

55M4500CCE00 REV A
The purpose of this manual is to provide the calibration technician with the procedures
essential for the promotion of proper machine operation for its intended purpose. The
importance of proper usage cannot be overstressed.
The calibration technician should have read, and be familiar with, the instruction
manual supplied with the system.
All information in this manual should be read and understood before any attempt is
made to calibrate the machine.
Since the manufacturer has no direct control over machine application and operation,
conformance with good safety practice in this area is the responsibility of the user and
his operating personnel.
All procedures herein are based on the use of the system under proper operating
conditions, with no deviations from the original design. Alteration and/or modification
of the equipment are strictly forbidden without written approval from RaycoWylie
Systems.
The i4500 RaycoWylie Systems Rated Capacity Indicator (RCI) is to be regarded only as
an aid to the operator. When the parameters are set correctly, the indicator will warn
the crane operator of an approaching overload condition that could cause damage to
equipment, property, and/or injury to the operator or site workers in the vicinity of the
crane and its load. Prior to the calibration being completed the system will not provide
correct warnings and it is essential that other means are used to establish safe use of
the machine.
This system must never be used, under any circumstances, as a substitute for the good
judgment of a crane operator when carrying out approved crane‐operating procedures.
Responsibility for the safe operation of the crane lies with the crane operator. The
indicator equipment will not necessarily prevent crane damage due to overloading and
related causes if not set properly.