55M4500CCE00 REV A
Alternative location of
hoist drums using guide
sheaves on boom. For this
situation dimensions
cl6a
and
cl6m
are negative.
Step #6: “block capacities and block weights” setting
This menu contains the capacities and weights of all the available hooks for the crane,
the hook(s) in use must be entered here for subsequent selection in the configuration
setting of the system. The capacity of each hook will be used by the i4500 system to
determine whether the current SWL for the configuration and position of the machine is
limited by the load curve, the parts of line or the hook capacity.
After selecting “block capacities and block weights” from the main calibration menu the
screen will show:
Set the capacity and weight of each hook block in turn using the calibration units set
earlier (noted at the bottom of this screen). Remember to press
“save”
once all the
data is entered. Numbers shown are for illustration purposes only and must be set to
show real data from the machine.
Содержание i4500
Страница 2: ...55M4500CCE00 REV A...
