55M4500CCE00 REV A
Step #7: “system options” setting
The system options menu allows various features to be turned on and off and may vary
depending on the version of software installed in the i4500 system.
These settings will
normally be pre‐set before delivery and will not require changing.
Navigate through the calibration menu using
“
”
or
“
”
to highlight “system options”
and press
“
”
to enter.
Chart interpolation.
Determines whether or not the i4500 system interpolates the
crane capacity charts with respect to radius/angle or whether it steps from one capacity
to the next. If chart interpolation is ON, the system will display a smooth transition
between rated points. If it is OFF, then once the radius/angle exceeds a listed value on
the chart the capacity will drop to the next rated capacity, this is known as a stepped
chart. Refer to the crane manufacturer’s load chart to determine if the charts should be
interpolated or stepped.
Datalogger.
Allows the datalogger, if fitted, to be switched ON or OFF.
Crane ID.
This is only used if a datalogger is installed and is a unique identifier for the
crane. It is used in conjunction with the Rayco Wylie data logger software for PC to
manage ‘whole life’ data for the machine and acts as an identifier for files once
downloaded and removed from the machine.
Password protection.
This is only used if a datalogger is installed and, when set to ON,
will set the system to ask for a pass code number to be entered each time the system is
switched on. See also “user id” settings (page 47).
“Limit saved” message.
Optional feature, if enabled then setting this to ON will display
a message on start up indicating a limit is saved if a limit has previously been set.
Limit access with HDIN.
When set to ON, Limits menu is accessed via an external input
rather than the normal menu button. Refer to the wiring diagram for details if relevant.
Содержание i4500
Страница 2: ...55M4500CCE00 REV A...
