55M4500CCE00 REV A
Start this procedure with the boom fully retracted.
Use
“
”
or
“
”
to choose “No load calibration” and press
“
”
to enter.
If the selected configuration has been calibrated previously the system will prompt for a
new calibration or give the option to escape:
Warning:
if you press delete
“X”
, the previous calibration will be lost.
Press
“X”
to delete the existing calibration and go to the next screen or
“
”
to escape.
If this is the first calibration for this duty the display will show:
Where ‘
6’
in this example is the current selected duty number. This must correspond
with the current crane configuration, if incorrect use
“
”
to exit the calibration mode
and set the correct duty number in the normal working mode.
After pressing
“
”
to accept the duty to be calibrated the display shows:
Содержание i4500
Страница 2: ...55M4500CCE00 REV A...
