C120R Operator Service Maintenance Manual
50
Engine Oil & Filter - Change
The engine oil dipstick (1) is accessible through the right
engine enclosure door. Follow the directions found in the
Engine Operation Manual for correct procedures on how
to read the dipstick.
During the initial break-in period, the engine will consume
more oil than usual. Check the oil level daily. Low oil level
can cause severe engine damage.
1. Place an oil catch pan under the oil drain plug on the
engine. To access the drain plug, first remove the belly
pan. Once the belly pane has been removed, remove
the drain plug (2) and drain the oil. Use an approved
container to store used oil.
2. Remove the oil fill cap (3) to aid in draining.
3. Using a heavy duty strap filter wrench, remove the oil
filter on the machine and replace with a new one (4).
4. Using your finger, put a light coat of oil on the seal of
the new filter . Ensure old seal is removed.
5. Replace and tighten all fittings.
6. Add the correct amount of oil to the crankcase 2.2
gallon or 8.5 liters.
7. Start the engine and run for two minutes then shut off.
8. Check the dipstick, and top off the engine to the upper
full line on the dipstick.
2
Maintenance
NOTICE
Always check oil level while machine is parked on
level ground.
4
1
3
Содержание C120R
