Raw Desigh PowerPUC G4, Инструкционный лист

Страница: 9 / 26

PART 2: Mounting the PUC
Cut lengths of the included velcro strip into sections that are about 1/8” longer than the
width of the PUC. A good pair of scissors works well. Do this while the 2 halfs of the
Velcro strips are together - and keep them that way. Don’t pull them apart. You should
get about 5 pieces. Don’t worry if they are not
exactly the same length.
You will want to space the Velcro sections evenly around the rotor and also put them in
areas where you will get the most surface contact between the rotor and Velcro pieces.
More surface area = better adhesion. Take some time to examine and decide on this, then
clean the area one more time. Be careful not to erase your reference lines. Remember to
place the Velcro along the reference line(s) you drew.