For the moment, get the PUC wires out of the way so you will be able to spin the wheel
without them getting caught anywhere. Tuck them inside and add a piece of tape to hold
them there.
Step 3. Checking concentricity (alignment).
Making sure the PUC is concentric with the wheel is very important. Failure to do so can
result in damage to the system.
If you were able to mount your PUC with one of the “natural” alignment features
previously mentioned, this “Checking concentricity” section is most likely unnecessary to
actually perform. BUT READ IT ANYWAY! We are probably over-explaining the
process, but there’s no danger of being over-educated and it may help you someplace else
at another time.
We’ve intentionally misaligned the PUC below to show you how to adjust it if necessary.
It’s basically the same process as when you marked the rotor, but this time you will be
marking the PUC itself.
Содержание PowerPUC G4
Страница 13: ...New line showing misalignment...
Страница 17: ...Alignment check 12 o clock position Good...
Страница 18: ...Alignment check 9 o clock position Still good...
