Raw Desigh PowerPUC G4, Инструкционный лист

Страница: 2 / 26

The G4 PUC
Our New G4 POWER-PUC
™
is a substantial advancement in RAW Design’s (Patent
Pending) Wheel Lighting Systems.
Below is a picture of the system. The 2 copper colored rings are the “PUCs”. The PUCs
are mounted directly on the wheels (…actually rotor, pulley or sprocket) and will
obviously spin with the wheels. Each PUC has 4 contact rings. Individual wires attached
to each ring exit the back of the PUC and will latter be connected to your wheel mounted
LEDs. 4 rings give several control options, as well as the ability to use color-changing
lights. Color changing lights are also referred to as “RGB” lights. This stands for
R ed,
G reen and B lue. Any of these colors either by themselves, or in different combinations,
will create almost any color.
Also shown are the 2 Brush Housings (black) and Universal Mounts (silver).
Each Brush Housing has 4, spring loaded brushes and each brush is connected to a wire.
These wires will then be connected to a controller(s) and the bikes battery.
Once everything is installed, electrical power from the bikes battery will flow through the
4 brushes to the 4 rings of the PUC and to the LEDs.
PUC Brush Housing Universal Mount