Pick up one of the PUCs and examine it. You will see it has a split as shown below.
There is an interlocking notch on either side of the split.
Forget about double stick or Velcro for now. Take the split ring and “screw” it over the
fork like is shown in the lower left picture.
DO NOT OVER-BEND THE RING!! It will need to be as flat as possible at the end of
the installation. Minor bends (more like slight curves) can be adjusted by hand at final
fitting, but if you put a “crease”, crack of break it…game over and you’ll need a new
ring.
Содержание PowerPUC G4
Страница 13: ...New line showing misalignment...
Страница 17: ...Alignment check 12 o clock position Good...
Страница 18: ...Alignment check 9 o clock position Still good...
