The following are GENERIC instructions for remotes. Instructions that come with your
remote should supersede the below.
If you are using a Color Changing (RGB) remote:
1)
Connect the blue wire from the Brush Housing (BH) to the blue wire from the
remote.
2)
Connect the green wire from the Brush Housing (BH) to the green wire from the
remote.
3)
Connect the red wire from the Brush Housing (BH) to the red wire from the
remote.
4)
Connect the black wire from the Brush Housing (BH) to the ground “GND” wire
from the remote.
5)
Connect the “12V IN” wire on the remote to one side of the switch.
6)
Connect the other side of the switch to the “+” side of the battery.
7)
Connect the other ground “GND” wire from the remote to the “-“ side of the
battery.
8)
The extra blue or “ANT” wire on the remote does not connect to anything.
BH
Switch
Fuse
+
B
att
er
y
-
RGB
Remote
Содержание PowerPUC G4
Страница 13: ...New line showing misalignment...
Страница 17: ...Alignment check 12 o clock position Good...
Страница 18: ...Alignment check 9 o clock position Still good...
