Raven RCM-Sprayer Hawkeye 2 Скачать руководство пользователя

Страница: 58 / 124

CHAPTER 6

RCM - Sprayer and Hawkeye® 2 Calibration and Operation Manual

PRESSURE GAUGE

When the RCM - Sprayer product is selected, the pressure gauge provides a visual representation of the actual

boom pressure and displays the allowable pressure deadband during field applications.

NOTE:

When an injection product is selected, the pressure gauge displays the pressure at the injection

pump.

RCM - SPRAYER LOWER HOME SCREEN

The lower portion of the home screen provides on-screen indicators for switch status and remaining tank volume.

Refer to the following sections for additional information regarding the information provided in this area of the

home display.

MASTER SWITCH STATUS

NOTE:

If a Raven ISOBUS switch box, or another compatible master

switch, is connected to the Hawkeye® 2 nozzle control system,

the current status of the master switch will be displayed toward

the lower, left corner of the screen. This is a display only and the

physical switch must be used to toggle the system master on or

off during field applications.

TANK VOLUME INDICATOR

The system provides a calculated volume of product remaining in

the tank as a tank indicator in the application information area.

Select this indicator to access the Tank Fill Config prompt.

NOTE:

A tank capacity value must be entered to allow the

tank volume indicator to display the tank level.

SECTION STATUS DISPLAY

The Hawkeye® 2 system provides the status of

each configured section on the home display.

Section On/NCV2s On.

The section is on and

all NCV2s are actively applying.

Section On/Mixed NCV2 Status.

The section is

enabled and at least 1 NCV2 assigned to the

section is applying. The task controller may automatically control NCV2s as needed to cover field area.

Section On/NCV2s Off.

The section is enabled and ready for application. The task controller may automatically

turn on NCV2s assigned to this section.

Section Off.

the section is manually disabled. NCV2s assigned to this section cannot be enabled or turned on by

the task controller.

Section/

NCV2s On

Sections On/

NCV2s Off

Sections

Off

Section On/

Mixed NCV2s

Содержание RCM-Sprayer Hawkeye 2




























































































































Результаты поиска

Содержание RCM-Sprayer Hawkeye 2

Отзывы:

Похожие инструкции для RCM-Sprayer Hawkeye 2

Бренды по названию

Популярные бренды

Raven RCM-Sprayer Hawkeye 2, Руководство по калибровке и эксплуатации

Результаты поиска

Содержание RCM-Sprayer Hawkeye 2

Отзывы:

Похожие инструкции для RCM-Sprayer Hawkeye 2

Бренды по названию

Популярные бренды