Raven RCM-Sprayer Hawkeye 2, Руководство по калибровке и эксплуатации

Страница: 55 / 124

6
Operation: Universal Terminal Definitions 45
OPERATION
TOOLS
Select the Tools Menu softkey to access the calibration prompts. See Chapter 4, System Setup , for
additional assistance with system calibration, features, and settings.
TOTALS
Select Totals softkey to view the distance, volume, and area tallies calculated by the RCM - Sprayer
ECU. See Chapter 7, Totals , for additional assistance with the Totals features.
The totals button provides options to access a Current Totals, Device totals, and Distance totals
tabs.
DIAGNOSTICS
Select Diagnostics to access system information and tests and diagnostic trouble codes (DTCs).
Refer to Chapter 8, NCV2 Diagnostics , for additional assistance with the Hawkeye® 2 NCV
diagnostics prompts.
The DTC Status indicator is displayed on the Diagnostics softkey and provides a visual indicator of
the system status during field applications. The status indicator provides the following display states:
Refer to Chapter 9, Troubleshooting , for additional assistance with diagnostic trouble codes and using the DTC list.
OK. The system status is normal and no alarm conditions are currently
present.
Caution. A minor alarm condition has been detected. The control system is
operating normally, however, the system has detected that a condition exists
which could impact the current application.
Critical. A critical system condition has been encountered. The control
system is not responding as expected and the operator should cease
application and troubleshoot the issue before resuming operations. The
system will not apply in this state
Tools
Menu
Totals
Diagnostics