Ravel RE-900, Инструкция по установке, пусконаладке и эксплуатации

Страница: 42 / 53

41 RE / DD / UM / RE-900 1.0-0
1. User Access Ctrl
2. Chg Config Pass
[Pass Ctrl]
4.2.2.4.3.2.1 User Access Control
In this mode user password can be controlled by enable or
disable options by ‘#’ key.
Use r Pas sw o rd
Disab led
[# Ed it]
[Use r Pas s Ctrl ] User Pass w ord
<<Disab le> >
(# Ed it) [ Save ]
4.2.2.4.3.2.2 Change Config Password
From the Change config Mode screen we can reset the
advance password. The display screen of this mode showed as
below. The Default Password is”654321”. The Password should be
five digit.
Old Pass w ord?
[Ch g Co nf ig Pas s]
Ne w Pa ssw o rd?
[Chg Conf ig Pass ]
Re - Ne w Pa ssw o rd?
[ Chg Co nf ig Pas s]
Re - New Pass w ord
Up date d
4.2.2.4.3.2 Factory Default
By selecting the number 3 from the advanced screen, the system
enters into the factory default setting mode. After entering into this
mode, screen will be as below.
Factory Default
Recovering ......
4.2.3 About
It shows the details of the panel by pressing enter key in the
about menu. The LCD display will show as below. The model
shown with respect to the no. of zones, for 16 zone RE – 900-
16Zone, 32Zone RE-900
Fire Alarm Panel
Model: RE-90 0
Ver 1.0
16 Zone P anel
Note: Version shown is software version.