Ravaglioli RAV307H.4 8WS/LS VAR290/F, Оригинальное руководство пользователя

Страница: 53 / 200

53
Configuration setup
N.B.: The columns must always have an even number (minimum 4 and maximum 8)
A) New configuration
Only possible if the trolleys are all on the descent limit switches.
As first operation, to determine the MASTER column and the subsequent SLAVE columns.
1) When starting the switchboard, the following shall appear on the display:
> > L A S T C o n f i g < <
N E W C o n f i g
move down with the blue Key , to
L A S T C o n f i g
> > N E W C o n f i g < <
confirm with the black “ENTER” key
The following is displayed:
> > C o l M A S T E R < <
C o l S L A V E
determine the MASTER column by pressing the black “ENTER” key
The system starts on the “Chanel 2” configuration radio channel.
The operator can choose a different radio channel than the one proposed using the Red and Green buttons (to de-
crease or increase the number of the radio channel). NB: Available radio channels (3-4-5-6-7-8-9).
> > C h a n n e l 2 < <
W a i t S l a v e s
Now the display shows “ Wait SLAVE ”, which means that the system is waiting for you
to select/configure the SLAVE columns.
2) Shift to another column, when starting the switchboard the display shall show the following:
> > L A S T C o n f i g < <
N E W C o n f i g
move down with the blue key , to
L A S T C o n f i g
> > N E W C o n f i g < <
confirm with the black “ENTER” key
the following is displayed:
> > C o l M A S T E R < <
C o l S L A V E
move down with the blue button , to
C o l M A S T E R
> > C o l S L A V E < <
confirm the SLAVE column by pressing the “ENTER” black key
Now the SLAVE column receives from the MASTER column the configuration message and the display shows:
> > C h a n n e l 2 ?< <
C o l u m n 2
The message indicates which channel is the Radio channel that shall be used at the end of the configuration process (Channel 2)
and the ID that will be assigned to the column (Column 2).
After you have verified that the proposed channel is the same
as the MASTER column, you must confirm the details by pressing the black “ENTER” key and the display will show:
> > I D 2 C H 2 < <
S e l e c t e d
confirm the correct configuration of the SLAVE 2 column
N.B.: The operator must repeat the operations at point 2 for all columns of the power lift.
7
0526-M002-3