Rauch AXIS-M 20.2 EMC, Инструкция по эксплуатации

Страница: 74 / 236

General commissioning (all machine types) 8
54
AXISAXIS
8.4 Installing the machine on the tractor
8.4.1 Preconditions
Check the following specific requirements:

Are both the tractor and the machine in a reliable condition?

Does the tractor comply with the mechanical, hydraulic, and electrical require-
ments?
-
See “Requirements for the tractor“ on page 50 .

Do the attachment categories of the tractor and the machine match (if neces-
sary, consult your dealer)?

Is the machine securely positioned on level and solid ground?

Do the axle loads conform to the stipulated calculations?
-
See “Axle load calculation“ on page 41 .
Position of the distance washers (only for AXIS 50.2, category III)
Ensure the correct position of the distance washers [2] included in the scope of
delivery on each side of the lower link ball [1].
Figure 8.7: Position of the distance washers when installing the machine
(AXIS 50.2, category III)
n
DANGER
Danger to life due to unsuitable tractor
Using an unsuitable tractor for the machine may result in severe
accidents during operation or road travel.
 Only use tractors that comply with the technical require-
ments of the machine.
 Use the vehicle's documentation to check if your tractor is
suitable for the machine.
1
2