Rauch AXIS-M 20.2 EMC, Инструкция по эксплуатации

Страница: 227 / 236

General maintenance and repair (all types)
207
9
AXIS
AXIS
20.1
AXIS
9.10.2 Checking the oil level, changing the oil
The transmission does not need to be lubricated under normal operating condi-
tions. However, we recommend changing the oil after 10 years.
A shorter oil change interval is recommended if fertilisers with a high dust content
are used and the spreader is frequently cleaned.
Requirements:

The machine must be in a horizontal position to check the oil and to fill the oil.
To drain the oil, the machine must be in slightly tilted position (approx.
200mm).

PTO drive and tractor engine are stopped, the ignition key of the tractor is re-
moved.

When draining the oil, have a sufficiently large collecting vessel (approx. 11l)
ready.
Figure 9.10: Gear oil filling and draining points; left:AXIS 20.2, AXIS 30.2, right
AXIS 50.2
[1] Filling screw
[2] Oil level checking screw
[3] Drain screw
Checking the oil level

Open the oil level checking screw.
 The oil level is satisfactory when the oil reaches the lower edge of the
hole.
Draining oil:

Tilt the machine sideways (tilt approx. 200 mm).

Position the collection vessel under the oil drain plug.

Open the oil drain plug and let the oil drain out completely.

Close the oil drain plug.
1
2
3