Rauch AXIS-M 20.2 EMC, Инструкция по эксплуатации

Страница: 92 / 236

General commissioning (all machine types) 8
72
AXISAXIS
Normal spreading in or out of the headland tramline
If you continue spreading in the field after headland tramline spreading:

Move the border spreading unit TELIMAT out of the spreading area.
Figure 8.20: Normal spreading
[A] End of spreading fan when spreading in the headland tramline
[E] End of spreading fan when spreading in the field
[T] Headland tramline
[X] Working width
The metering slides open or close at different distances to the field border of the
headland when travelling backwards and forwards.
NOTICE
If you use a GPS System (e.g. QUANTRON guide) as well as the operating unit
QUANTRON-E2 and/or QUANTRON-A for operating your machine, check that
the software of the operating unit includes the
OptiPoint function.
The OptiPoint function by RAUCH calculates the optimal switching-on and
switching-off point for spreading in the headline based on the settings in the
operating unit.

You can skip the information in the present paragraph since the OptiPoint
function assumes these settings.

Please observe the operator’s manual for the corresponding operating unit.
E
A
X