Rauch AXIS-M 20.2 EMC, Инструкция по эксплуатации

Страница: 105 / 236

General commissioning (all machine types)
85
8
AXISAXIS
8.11.3 Running three passes
Layout:

Testing area width:3 x tramline distance

Length of testing area: 60 to 70 m

The three tracks must be parallel. If you are running the test without drilled
tramlines, the paths must be measured using a tape measure and marked
(e.g. with rods).
Figure 8.29: Layout for three passes
Preparing the three passes:

Choose a similar fertiliser from the fertiliser chart and adjust the spreader ac-
cordingly.

Set the mounting height of the machine as specified in the fertiliser chart.
Make sure that the mounting height includes the top edge of the trays.

Check the spreading elements (spreading discs, spreader vanes, outlet) for
correct functioning and completeness.

Place two collecting vessels each, one after another, at a distance of 1 m in
the overlap zones and in the centre track (according to figure 8.29 ).
NOTICE
We recommend the layout plan up to a spreading width of 24 m . A layout plan
for greater working widths is attached to the PPS5 practise test kit.
1 2 3
1/2x 1/2x
x