Rauch AXIS H 30.2 EMC, Инструкция по эксплуатации

Страница: 83 / 132

Spreading operation
77
8
8.2 Instructions regarding the spreading operation
The intended use of the machine includes complying with the prescribed process
stipulated by the manufacturer.
Spreading therefore always includes prepara-
tion and cleaning/maintenance .

Carry out spreading operations as described below.
Prepa
ra
tion

Installing the spreader on the tractor

Closing the metering slides

Presetting the mounting height

Filling in the fertiliser

Adjusting the application rate

Setting the working width
-
Selection of the correct spreading disc
- Adjusting the drop point
Sp
re
ading

Travel to the spreading location

Check the mounting height

Switch on the hydraulic system
1
1. For the load sensing system, the hydraulic circuit of the accessory equipment is always under
pressure.

Activate spreading disc start

Open the slide and start spreading

Finish spreading operations and close the slide

Discharge residual material
Clea
ning/ma
intenanc
e

Open metering slide

Remove the spreader from the tractor

Cleaning and maintenance