Rauch AXIS H 30.2 EMC, Инструкция по эксплуатации

Страница: 52 / 132

Commissioning 7
46
Mounting instructions

Only AXIS H 30.2 EMC : The machine can be connected to a tractor with
category III linkage only with category II clearance. Use reducing sleeves.

The bottom and top linkage pins must be secured with linch pins or spring
clips.

Attach the machine according to the values in the fertiliser chart. This guar-
antees the correct cross-distribution of the fertiliser.

Any oscillating movements during spreading are to be avoided. Make sure
that the machine does not have too much sideways play.
-
The lower link arms of the tractor are to be braced by means of stabilising
struts or chains.
1. Start the tractor.
2. Move the tractor to the machine.

Do not latch the lower link hooks into place yet.

Make sure there is enough space between the tractor and the machine in
order to be able to connect the drives and control elements.
3. Switch the tractor motor off. Remove the ignition key.

Hydraulic systems with constant flow pump (delivery condition)
Hydraulic systems with variable pump without external load sensing connec-
tion (constant flow operation)

Hydraulic systems with variable pump with external load sensing connection
(Power Beyond)
Figure 7.3: Mineral fertiliser spreader connection lines
[1] Free return
[2] Pressure line
[3] Load sensing signal line
[4] ISOBUS connector plug
[5] Lighting cable
NOTICE
The machine can be connected to various hydraulic systems.
1 2 3 4 5