Rauch AXIS H 30.2 EMC, Инструкция по эксплуатации

Страница: 72 / 132

Commissioning 7
66
7.8 Setting the GSE boundary spreading unit (optional equipment)
The boundary spreading unit limits the spreading width (either towards the left or
right) to a range between approx. 0 m and 3 m from the centre of the tractor track
to the outer edge of the field.

Close the metering slide that points to the edge of the field.

Fold the boundary spreading unit downwards for boundary spreading.

The boundary spreading unit must be folded up again before starting the two-
sided spreading.
Figure 7.20: Setting the boundary spreading unit
[1] Numeric scale, left side
[2] Adjustment nut for numerical scale
[3] Indicator
[4] Hand grip
[5] Numeric scale, right side
1. The position of the pointer [3] is to be obtained from the assembly instruction
manual included in the scope of delivery.
2. Loosen the adjustment nut [2] for the numeric scale using the adjustment le-
ver of the machine.
3. Slide the numeric scale so that the pointer is directed to the value determined.
Use the hand grip [4] for this purpose.
4. Loosen the adjustment nut [2] for the numeric scale using the adjustment le-
ver of the machine.
NOTICE
The settings for the boundary spreading unit refer to the spreading disc work-
ing towards the inside of the field .
5
1
2
3
3
2
4