Rational SCC Series, Руководство по обучению

Страница: 110 / 200

110
SCC
Edition 10-2008a
Step Unit status Error Reason
75
(min 80 s
max. 1000 s) Heating of cabinet in combi. to 193°C (380°F)
•
Hot air heating: ON
• Steam Heating: ON
(when Hot air off)
•
Motor: ON ( max rpm)
• Humidity ap: Closed
12
71
No hot air heating
Max time of 1000sec
exceeded
In case of „12“ check: Hot air elements, SSR, cabinet sensor
90
(min 360 s
max 1000 s) Combination 170°C (338°F)
•
Hot air heating: ON 50%
• Steam Heating: ON (when Hot air off)
• Motor: ON (max rpm)
• Humidity ap: Closed
---
100
(min: 4x20 s;
max: 4x60 s) Controlling with all 4 fan speeds:
Steady signal of rpm and pressure
•
Hot air heating: ON 50%
• Steam Heating: ON (when Hot air off)
• Motor: ON (max rpm rst)
• Humidity ap: Closed
20
71
Value out of allowable
range
Max time of 4x240sec
exceeded
In case of „20“ check:
In diagnostic mode: P1, B4, rpm
110
(4x 30 s) Measuring at all 4 fan speeds:
Calibration value: Combination
• Hot air heating: ON if needed
• Steam Heating: ON (when Hot air off)
• Motor: ON (max rpm rst)
• Humidity ap: Closed
70 Calibration value not in
expected range (logic)
In case of „70“ check:
In diagnostic mode: P1, B4, rpm
Step 100 and 110 will run 1x for each rpm setting!
900
End – Exit diagnostic program and set DIP 1 to OFF
For data storage switch unit off and on!
Calibration SCC