Raritan COMMANDCENTER 2.20 -, Руководство пользователя

Страница: 63 / 150

C
HAPTER
4: C
OMMAND
C
ENTER
M
ANAGEMENT
51
6. Click on the Baud Rate drop-down arrow and select a rate.
7. Click on the Parity/Data Bits drop-down arrow and select a parity value.
8. Click on the Parity Check check box to enable the parity check.
9. Click on the Recv/Xmit Pace check box to enable the pace Xon/Xoff if necessary.
10. Click on the H/W Flow Control check box to enable flow control.
11. Select the associated category and element from the Device Associations table.
12. Click OK to configure the serial port or Cancel to exit without configuring. A Port Created
Successfully message confirms that port has been created.
13. Repeat steps 1 through 12 to configure other serial ports.
Configure a KVM Port
1. Click on the Devices tab and select a KVM device from the Devices tree.
2. On the Devices menu, click Port Manager , and then click Configure Ports . The Configure Ports
screen appears.
Figure 68 Configure Ports Screen