manualshive.com logo in svg

R&S CMW-KG4 Series, Руководство пользователя, Страница: 92 / 988

Поделиться
Скачать
R&S CMW-KG4 Series Скачать руководство пользователя страница 92

WCDMA Signaling

R&S

®

CMW-KG4xx/-KM4xx/-KS4xx

92

User Manual 1173.9657.02 ─ 11

The "GSM Signaling" application is still switched off at this point. Otherwise it could
happen that the mobile synchronizes to the GSM signal instead of the WCDMA
signal.

5. Press the "Connect ..." hotkey to set up a WCDMA CS voice or RMC connection.

Note the connection states displayed in the main view and wait until the connection
(the call) has been established.

2.3.2.4

Initiating the Handover

After you have completed the preparations described in the preceding section, perform
the following steps to initiate a handover.

1. Press the "Inter/Intra-RAT ..." hotkey in the "WCDMA signaling" application.

The handover configuration dialog opens.

2. Select the GSM signaling application as handover target and configure the destina-

tion band and channel.

As a result, the GSM downlink signal is turned on automatically. Wait until the cell
icon in the handover dialog indicates RDY (ready for handover).

 

Application Sheets

深圳德标仪器 

135-1095-0799

Содержание CMW-KG4 Series





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов