manualshive.com logo in svg

R&S CMW-KG4 Series, Руководство пользователя, Страница: 915 / 988

Поделиться
Скачать
R&S CMW-KG4 Series Скачать руководство пользователя страница 915

WCDMA Generator

R&S

®

CMW-KG4xx/-KM4xx/-KS4xx

915

User Manual 1173.9657.02 ─ 11

6.2.3.1

Reference Measurement Channel (RMC)

The data content of the 3GPP downlink RMC is defined on transport channel level
according to 3GPP TS 25.101. The data sequence to be transferred is directly fed into
the Dedicated Traffic Channel (DTCH) and the Dedicated Control Channel (DCCH).
The transport channels are channel coded, multiplexed and mapped onto a Dedicated
Physical Channel (DPCH) with variable data rate (see figure below).

The downlink reference measurement channel generated in this way is to be used for
various transmitter and receiver tests specified e.g. in 3GPP TS 25.101 and 34.121.

The following example illustrates the generation of a 3GPP reference measurement
channel from the DTCH and DCCH transport channels and lists the physical and trans-
port channel parameters for an information bit rate of 12.2 kbps. For other bit rates
refer to specification 3GPP TS 25.101.

Fig. 6-8: Generation of RMC from DTCH and DCCH

Table 6-2: RMC physical parameters (12.2 kbps)

Physical Parameter

Value

Information bit rate

12.2 kbps

DPCH

30 ksps

Slot Format number

11

TFCI

On

Power offsets PO1, PO2 and PO3

0 dB

Puncturing

14.7 %

 

General Description

深圳德标仪器 

135-1095-0799

Содержание CMW-KG4 Series





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов