manualshive.com logo in svg

R&S CMW-KG4 Series, Руководство пользователя, Страница: 290 / 988

Поделиться
Скачать
R&S CMW-KG4 Series Скачать руководство пользователя страница 290

WCDMA Signaling

R&S

®

CMW-KG4xx/-KM4xx/-KS4xx

290

User Manual 1173.9657.02 ─ 11

For DAU IMS service: Establishing a voice over IMS call failed.

●

20 (Call Type not Usable)

:

For measurements: The measurement could not be started because the estab-
lished signaling connection had wrong properties.
For DAU IMS service: The voice over IMS settings could not be applied.

●

21 (Call Lost)

:

For measurements: The measurement was interrupted because the signaling con-
nection to the DUT was lost.
For DAU IMS service: The voice over IMS call was lost.

●

23 (Missing Option)

:

The ARB file cannot be played by the GPRF generator due to a missing option.

●

26 (Resource Conflict)

:

The application could not be started or has been stopped due to a conflicting hard-
ware resource or software option that is allocated by another application.
Stop the application that has allocated the conflicting resources and try again.

●

27 (No Sensor Connected)

:

The GPRF External Power Sensor measurement could not be started due to miss-
ing power sensor.

●

30 (File not Found)

:

The specified file could not be found.

●

40 (ARB File CRC Error)

:

The ARB file CRC check failed. The ARB file is corrupt and not reliable.

●

42 (ARB Header Tag Invalid)

:

The ARB file selected in the GPRF generator contains an invalid header tag.

●

43 (ARB Segment Overflow)

:

The number of segments in the multi-segment ARB file is higher than the allowed
maximum.

●

44 (ARB File not Found)

:

The selected ARB file could not be found.

●

45 (ARB Memory Overflow)

:

The ARB file length is greater than the available memory.

●

50 (Startup Error)

:

The Data Application Unit (DAU), a DAU service or a DAU measurement could not
be started. Please execute a DAU selftest.

●

51 (No Reply)

:

The DAU has received no response, for example for a ping request.

●

52 (Connection Error)

:

The DAU could not establish a connection to internal components. Please restart
the instrument.

●

53 (Configuration Error)

:

The current DAU configuration by the user is incomplete or wrong and could not be
applied. Check especially the IP address configuration.

●

54 (Filesystem Error)

:

The hard disk of the DAU is full or corrupt. Please execute a DAU selftest.

●

101 (Firmware Error)

:

Command Reference

深圳德标仪器 

135-1095-0799

Содержание CMW-KG4 Series





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов