PROGRAMMING OF VRAE
4 - 29
4.7.1 Change Site ID & Change User ID
The user can enter an 8 digit alphanumeric site ID & User ID
in the programming mode. These ID’s will be included in
the datalog report.
1. “Change Site ID?” and “Change User ID?” are the first
and second sub-menu items in Table 4.6.
2. Press
[MODE]
key to choose one of them and press the
[Y/+]
key, the display shows the current site ID: “Site ID
= xxxxxxxx” or the current user ID: “User ID =
xxxxxxxx” with the left most digit flashing.
3. Press the
[Y/+]
or
[N/-]
key to cycle through all 26
letters and 10 numerals. Press
[MODE]
key
momentarily to advance to the next digit. The flashing
digit will move to the next digit to the right. Repeat this
process until all 8 digits of the new site ID are entered.
4. Press and hold the
[MODE]
key for 1 second to exit the
data entry mode and move to the next monitor setup sub-
menu.
5. If there is any change to the existing site ID, the display
shows “Save?” Press the
[Y/+]
key to accept the new site
ID and exit the monitor setup sub-menu. Press the
[N/-]
key to discard the changes and move to the next sub-
menu.
