PROGRAMMING
4 - 19
4.7.2 Change User ID
The user can enter an eight digit alphanumeric user ID in the
programming mode. This user ID will be included in the
datalog report.
1. “Change User ID?” is the second sub-menu item in Table
4.5.
2. Press the
[Y/+]
key and the display shows the current user
ID: “User ID = xxxxxxxx” with the left most digit flashing.
3. Press the
[Y/+]
or
[N/-]
key to cycle through all 26 letters
and 10 numerals. Press
[MODE]
key momentarily to
advance to the next digit. The flashing digit will move to
the next digit to the right. Repeat this process until all 8
digits of the new user ID are entered.
4. Press and hold the
[MODE]
key for 1 second to exit the
data entry mode and move to the next monitor setup sub-
menu.
5. If there is any change to the existing user ID, the display
shows “Save?” Press the
[Y/+]
key to accept the new user
ID and exit the monitor setup sub-menu. Press the
[N/-]
key
to discard the changes and move to the next sub-menu.
