COMPUTER INTERFACE
5 - 14
5.8 Password of UltraRAE Configuration
Each UltraRAE configuration is protected by a 4-digit
password. The user needs to enter the correct password before
a new configuration file can be sent to the UltraRAE monitor.
Default Password
The initial default password is “0000”.
Create Password
First, open the default configuration file by clicking on the
“CONF” button or by opening the “default.cfg” file. Select
“level 1” security. The “grayed” password field becomes
visible. Enter a 4 digit password in this field. Click
[OK]
button to exit the dialog box. Save the configuration file use
“Save As” function from the File menu. The newly saved
configuration file will now be protected by the 4-digit
password.
Modify Password
To modify the password of an existing configuration file, open
the configuration file from the File menu. The password field
should be invisible. Click “SEND” button or select Send
Configuration function from the Communication menu. A
dialog box will appear and ask for the password. Enter the
previously selected password and click
[OK]
button. If the
password entered is correct, the software will try to send the
configuration file to the UltraRAE monitor. Since there is no
monitor connected to the PC, the software will time out after
about 30 seconds. Now, select Edit Configuration function
from the Action menu. The password field will become visible
in the dialog box. Modify the password as needed and save the
modified configuration file with the new password.
