PROGRAMMING
4 - 16
4.6.3 Change Data Log
This function allows the user to enable or disable the data
logging. At the beginning of each measurement sample, the
current status of this feature is displayed (Log On/Log Off).
1. “Change data log?” is the first sub-menu.
2. Press the
[Y/+]
key to change the data logging function
(enable/disable). The display will show the current status of
this feature (Log On/Log Off) followed by a question mark.
3. Press the
[N/-]
key to change the present state of the logging
function. The message “Are you sure?” will be displayed if
the status has change. Confirm the change by pressing the
[Y/+]
key. The
[N/-]
key is used to alternate the current
state.
4. Press the
[MODE]
key to exit and move to the next datalog
sub-menu.
