PROGRAMMING
4 - 18
4.7.1 Change Site ID
The user can enter an 8 digit alphanumeric Site ID in the
programming mode. This Site ID will be included in the data
log report.
1. “Change Site ID?” is the first sub-menu item.
2. Press the
[Y/+]
key and the display shows the current site
ID: “Site ID = xxxxxxxx” with the left most digit flashing.
3. Press the
[Y/+]
or
[N/-]
key to cycle through all 26
alphabets and 10 numerals. Press
[MODE]
key
momentarily to advance to the next digit. The flashing digit
will move to the next digit to the right. Repeat this process
until all 8 digits of the new site ID are entered.
4. Press and hold the
[MODE]
key for 1 second to exit the
data entry mode and move to the next monitor setup sub-
menu.
5. If there is any change to the existing Site ID, the display
shows “Save?” Press the
[Y/+]
key to accept the new Site
ID and exit the monitor setup sub-menu. Press the
[N/-]
key
to discard the changes and move to the next sub-menu.
