MeshGuard User’s Guide
Next, place the MeshGuard into the enclosure:
1.
Lift up the hinged cover of the enclosure.
2.
Slide the MeshGuard into the enclosure from the top.
3.
Close the cover of the enclosure.
4.
Insert the hex screw into the cover’s locking portion, and tighten
it.
5.
The MeshGuard is now ready to use.
1
2
3
4
5
Note:
The sensor cover on the bottom of the enclosure can be removed
so that the filter and sensor can be inspected without removing the
MeshGuard from the enclosure. Simply pull off the cover and follow the
maintenance procedures in this guide.
49
