MeshGuard User’s Guide
5.3.7 Change Low Alarm
At the Change Low Alarm menu, “Set” and “go” flash in alternation, and
“LOW“ and “ALARM” are visible in the display.
Press [Y/+] to enter and change the setting. Press [MODE] to exit and
return to Detection Mode or [N] to advance to the next menu.
The LCD displays current value. Change the value if necessary.
To change the value:
1.
Press [Y/+] to increase the number and [N/-] to decrease it.
2.
Press [MODE] to advance to the next digit.
3.
After moving to the last digit and making changes, press
[MODE]. A question mark (?) is shown in the display, asking if
you want to save the change.
•
Press [Y/+] for yes. The message “dn” means the change is
done.
•
Press [N/-] for no. A “no” message means that the change
was abandoned.
•
Press [MODE] to return to the first digit.
28
