MeshGuard User’s Guide
5.3.9 Change TWA setting (Portable Mode Only)
Note:
This menu is only available when the MeshGuard is in Portable
Mode. If it is in Fixed Mode, you will not see this menu and cannot
change its settings.
“Set” and “go” flash in alternation, and “TWA” is shown.
Press [Y/+] to enter and change the setting, [MODE] to exit and return to
Detection Mode, or [N/-] to advance to the next menu.
The LCD displays the current value. Change the value if necessary.
To change the value:
1.
Press [Y/+] to increase the number and [N/-] to decrease it.
2.
Press [MODE] to advance to the next digit.
3.
After moving to the last digit and making changes, press
[MODE]. A question mark (?) is shown in the display, asking if
you want to save the change.
•
Press [Y/+] for yes. The message “dn” means the change is
done.
•
Press [N/-] for no. A “no” message means that the change
was abandoned.
•
Press [MODE] to return to the first digit.
30
