MeshGuard User’s Guide
Press [Y/+] to enter and change the setting, [MODE] to exit and return to
Detection Mode, or [N/-] to go to the next menu.
The LCD displays the current value (enabled or disabled). Change the
value if necessary.
Note:
“dIS” means disabled (radio off) and “En” means on (radio on).
5.3.13 Change Communication Interval
This menu allows you to change the interval between wireless
transmissions. “SET” and “ItUL” flash, to indicate that you can change
the interval. The interval can be set to 10, 30, 60, 300, or 600 seconds.
Note:
The default interval is 30 seconds.
Press [Y/+] to enter and change the setting, [MODE] to exit and return to
Detection Mode, or [N/-] to advance to the next MENU.
33
