PROGRAMMING AREARAE-Gamma
4-29
4.7.5 Change Real-time Clock
The AreaRAE-Gamma monitor is equipped with a real-time
clock. The user can enter the correct date and time into the
real-time clock in the Program Mode.
1. “Change Real-time Clock?” is the fifth submenu item.
Press [Y/+], the display shows both the current date and
time: “Date = April 01, ‘02” and “Time = hh : mm” with the
left most digit of the date flashing.
2. To modify this value, use the [Y/+] or [N/-] to change the
digit value and press [MODE] momentarily to advance to
the next digit. The flashing digit will move on to next digit to
its right. Repeat this process until the new date and time
values are entered. Press and hold [MODE] for 1 second to
exit data entry mode. If there is any change to the existing
value, the display shows “Save?” Press [Y/+] to accept the
new value and move to next submenu. Press the [N/-] to
discard the changes and move to next submenu.
