OPERATION OF AREARAE-Gamma
2-21
Other Datalog options will automatically start and stop:
Datalogging Event
Each time a datalogging operation is initiated, a datalog event
is created. Information, such as start time, datalogging period,
alarm limits, etc. will be recorded in the event header, followed
by the measurement data.
Datalogging Pause
Datalogging will automatically pause under the following
conditions:
1. Upon entering Program Mode. Datalogging will resume
upon exiting Program Mode.
2. Upon entering PC Communication standby mode.
Datalogging will resume upon exiting PC communication
standby mode, if datalogging mode was not set to manual
start/stop.
In both cases a new datalog event will be created when the
datalogging is resumed.
