PROGRAMMING AREARAE-Gamma
4-25
4.7.1 Change Site ID
The user needs to enter an eight-digit alphanumeric site ID in
the Program Mode. This site ID will be included in the datalog
report.
1. “Change Site ID?” is the first submenu item. Press [MODE]
to choose one of them and press [Y/+], the display shows
the current site ID: “Site ID = xxxxxxxx” with the left most
digit flashing.
2. Press the [Y/+] or [N/-] to cycle through all 26 letters and 10
numerals. Press [MODE] momentarily to advance to the
next digit. The flashing digit will move to the next digit to
the right. Repeat this process until all 8 digits of the new
site ID are entered.
3. Press and hold [MODE] for 1 second to exit the data entry
mode and move to the next monitor setup submenu.
4. If there is any change to the existing site ID, the display
shows “Save?” Press [Y/+] to accept the new site ID and
exit the monitor setup submenu. Press [N/-] to discard the
changes and move to the next submenu.
