PROGRAMMING AREARAE-Gamma
4-26
4.7.2 Change User ID
The user can enter an eight-digit alphanumeric user ID in the
Program Mode. This user ID will be included in the datalog
report.
1. “Change User ID?” is the second submenu item. Press
[Y/+] and the display shows the current user ID: ”User
ID=xxxxxxxx” with the left digits flashing.
2. Press the [Y/+] or [N/-] to cycle through all 26 letters and 10
numerals. Press [MODE] momentarily to advance to the
next digit. The flashing digit will move to the next digit of its
right. Repeat this process until all 8 digits of the new user
ID are entered.
3. Press and hold [MODE] for 1 second to exit the data entry
mode and move to the next monitor setup submenu.
4. If there are any changes to the existing user ID, the display
shows “Save?” Press [Y/+] to accept the new user ID and
exit the monitor setup submenu. Press [N/-] to discard the
changes and move to the next submenu.
