Radwin Transportation FiberinMotion, Руководство по развертыванию

Страница: 43 / 122

FinM Deployment Guide Release 4.5.10 2 ‐ 30
Lightning Protection Unit (LPU) Site Installation
7. Tighten the cable glands around the CAT ‐ 5e cables as shown in Figure 2 ‐ 59 .
8. Route one CAT ‐ 5e/6 up to the radio, and the other down to the IDU or PoE (via the
lower LPU). An LPU installed on a pole is shown in Figure 2 ‐ 60 .
9. RADWIN recommends that you add extra waterproofing to the connections
(see see "Waterproofing" on page 2 ‐ 31. ).
Figure 2 ‐ 60: Installing an LPU on a pole (side view)

To install an LPU on a wall:
1. Remove the grounding lug.
Figure 2 ‐ 58: Connecting cables to the LPU (1) Figure 2 ‐ 59: Connecting cables to the LPU (2)