Radwin Transportation FiberinMotion, Руководство по развертыванию

Страница: 33 / 122

FinM Deployment Guide Release 4.5.10 2 ‐ 20
TBS Antennas Site Installation
the location on the pole where you want to mount the antenna. (See Figure 2 ‐ 36
to Figure 2 ‐ 39 for mounting on a thin pole)
4. Place this “unit” on the pole where you want to mount the antenna. Once it is in
place, rotate the pole clamp as shown, then tighten both bolts.
Thick Pole
• This method is for mounting the TBS antenna on a pole of pipe size larger than 3.
• Use worm drive clamps (not supplied), threaded through the holes as shown. The pole
clamp is not needed.
Figure 2 ‐ 40: Connect Pole Clamp to Radio
Holder
Figure 2 ‐ 41: Tighten bolts
Figure 2 ‐ 42: Rotate Clamp and tighten bolts Figure 2 ‐ 43: Mounting Kit on pole