Radwin Transportation FiberinMotion, Руководство по развертыванию

Страница: 92 / 122

FinM Deployment Guide Release 4.5.10 4 ‐ 11
Project Tab Configuring the Radio Network
Figure 4 ‐ 5: Configurator ‐ Project tab, lower table (VLAN options)
Figure 4 ‐ 6: Configurator ‐ Project tab, lower table (Diffserv options)
Min: Set the minimum standard priority level that the QoS category will receive:
• In Figure 4 ‐ 5 (showing values according to the VLAN standard), Real Time has a
minimum of 6.
• In Figure 4 ‐ 6 (showing values according to the Diffserv standard), Real Time has a
minimum of 48.
Max: Set the maximum standard priority level that the QoS category will receive.
• In Figure 4 ‐ 5 (showing values according to the VLAN standard), Real Time has a
maximum of 7.
• In Figure 4 ‐ 6 (showing values according to the Diffserv standard), Real Time has a
maximum of 63.
3. Downlink % and Uplink % : Set the percentage of traffic each QoS category is to be
allotted. This can be different for the downlink (TBS ‐ > TMU) or uplink (TMU ‐ >TBS)
direction. If traffic of a certain QoS level is more than this percentage, it is treated
as Best Effort.
You must make sure to cover all the priority levels, otherwise the system will
create errors. No warning will be given.
The percentages cannot add up to more than 100, otherwise the system will
create errors. No warning will be given.
If the percentages add up to less than 100, the unused priority will be distributed
to the remaining priorities.