Radwin Transportation FiberinMotion, Руководство по развертыванию

Страница: 55 / 122

FinM Deployment Guide Release 4.5.10 2 ‐ 42
TMU Mounting Site Installation
9. Place each mounting slide with the stopping flap towards the rear of the rack, and
using the Philips screws with the black washers, fasten the mounting slides to the
cage nuts and tighten.
Figure 2 ‐ 71: Placing and fastening mounting slide
10.Once both mounting slides are fastened tightly on the rack, insert the drawer as
follows:
a. Place the framework arms of the drawer into the mounting slides carefully. Make
sure they are straight.
b. Push back the drawer until the framework arms touch the ball ‐ bearing grey
housing.
c. While pressing outwards on both ball ‐ bearing grey housings, push the drawer in
further until the framework arms engage the ball ‐ bearing housings.
d. Further push the drawer until the locking lever stops it.
e. Release the locking levers, and push the drawer in all the way, even through some
resistance towards the end.