Radware Alteon, Инструкция по применению

Страница: 69 / 842

Alteon Application Switch Operating System Application Guide
Securing Alteon
Document ID: RDWR-ALOS-V2900_AG1302
69
Accounting
Accounting is the act of recording a user's activities on Alteon for the purposes of billing and/or
security. It follows the authentication and authorization actions. If the authentication and
authorization actions are not performed through , no accounting messages are
sent out.
Whenever a command successfully executes, creates an accounting message and sends it
to the server.
The attributes provided for the accounting are:
• protocol (console, Telnet, SSH, HTTP)
• start time (in seconds)
• stop time (in seconds)
• elapsed time (in seconds)
• disc cause (a string)
Note: Other than these attributes, the cmd and cmd-arg accounting attributes are also supported
for command logging.
Configuring Authentication
To configure authentication
1. Turn authentication on, then configure the primary and secondary servers.
You can configure IPv4 or IPv6 addresses for TACACS servers.
2. Configure the secret.
l2oper 24
l3oper 25
l3admin 26
>> Main# /cfg/sys/tacacs
(Select the Server menu)
>> Server# on
(Turn on)
Current status: OFF
New status: ON
>> Server# prisrv 10.10.1.1
(Enter the primary server IP)
Current primary server: 0.0.0.0
New pending primary server: 10.10.1.1
>> Server# secsrv 10.10.1.2
(Enter the secondary server IP)
Current secondary server: 0.0.0.0
New pending secondary server: 10.10.1.2
Table 6: Alteon-Proprietary with Enabled Privilege Level Mapping for
Alteon User Access Level level