manualshive.com logo in svg

Radware Alteon, Инструкция по применению

Поделиться
Скачать
Radware Alteon Скачать руководство пользователя страница 604

Alteon Application Switch Operating System Application Guide

 

Advanced Denial of Service Protection

604

 Document 

ID: 

RDWR-ALOS-V2900_AG1302

Protection Against Common Denial of Service Attacks

Alteon can protect ports against a variety of DoS attacks, including Port Smurf, LandAttack, Fraggle, 
Blat, Nullscan, Xmascan, PortZero, and Scan SynFin, among many others. Enable DoS protection on 
any ports connected to unsafe networks.

Configuring Ports with DoS Protection

The following is an example procedure for configuring ports with DoS protection.

To enable DoS protection on any port that is connected to an unsafe network

Once enabled, this feature detects and drop packets containing any of the supported types of DoS 
attack.
1. Enable DoS protection on the ports.

2. Add a DoS attack type to guard against.

Note:

To determine which DoS attack types a port is guarding against, view the current 

settings by using the command 

/cfg/security/port <port number>/cur

.

3. Optionally, remove a DoS attack type from a port:

4. Repeat 

step 1

 and 

step 2

 to apply DoS protection to any other ports.

5. Apply and save the configuration.

Viewing DoS Statistics

You can view the number of times packets are dropped when a DoS attack is detected on Alteon or 
on a specific port.
When an attack is detected, Alteon generates a message similar to the following:

>> Main# /cfg/security/port 1/dos enable

>> Current Protocol anomaly and DOS attack prevention: disabled

New Protocol anomaly and DOS attack prevention: enabled

>> Main# /cfg/security/port 1/dos/add <DoS attack type>

>> Main# /cfg/security/port 1/dos/rem <DoS attack type>

>> Jun 18 22:33:32 ALERT   security: DoS Attack:Fraggle

sip:192.115.106.200 dip:192.115.106.255 ingress port:1

Содержание Alteon











































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды